20
Ares II Rx(Receiver)
The Juno TTL in Ares II Rx Wireless Mode can be triggered by Phottix Ares II
Transmitters, Phottix Odin II Transmitters and Phottix Juno TTL flash in Odin II Tx
Mode.
Skyport RX(Receiver)
In Skyport Rx Mode, the Juno TTL flash can be triggered by Elinchrom EL
Skyport Transmitter Plus, Elinchrom EL Skyport Transmitter Plus HS, Elinchrom
EL Skyport transmitter Pro.
OP Tx(Master)— Using Canon Infrared triggering system
Using pulses of light, the Juno TTL flash on camera can adjust and fire remote
flashes in OP Rx Mode .
OP Rx (Slave)—Using Canon Infrared triggering system
Remote Juno TTL (Canon) in OP Rx Mode are controlled and fired by on-camera
flashes in OP Tx Master Mode.
Note: Both OP Tx and OP Rx flash needs to be Juno TTL for Canon.
S1 Rx (Slave)— Optical Slave
In S1 Rx Mode other nearby flashes will trigger the Juno TTL in manual Mode
only when they are fired.
Please note: The Juno TTL cannot be triggered by Phottix Strato, Odin I TCU or
Ares .
In the wireless triggering Mode Selection screen, if the OK Button is not pressed,
after 12 seconds the flash will enter the current selected Wireless Mode.
OdinII Tx (Transmitter Mode)
Using the Juno TTL Flash in Odin II Tx Mode allows for a flash to be used on-
camera in TTL or Manual Mode as well as control three groups (A, B, C) –
adjusting TTL and manual power levels as well as flash head zoom on Juno TTL
flashes set in Odin II Rx Mode or other compatible flashes mounted on Phottix
Odin II receivers. In flash groups under manual Mode can also set ‘auto metering’
feature to assist it setting the desired power.
