22
Odin II Tx Ratio Mode
Ratio Mode
Ratio is similar to Canon’s native TTL system. The ratio of Groups A and B can be
set from 8:1 to 1:8. EV levels can also be adjusted. Adjustments to the local flash
(M) Mode and power can be made.
To Use Ratio Mode:
1. In Odin II Tx Mode, press the “MODE” Button to access the Ratio Mode.
2. Press Function Button 4 until the LCD displays
.
3. Press Function Button 2 (underneath
) to select local EV settings and
use the Selection Dial to adjust the EV. Press OK to confirm and exit.
4. Press Selection Button 3 (underneath
) and use the Selection Dial to
adjust the ratio between 8:1 to 1:8. Press OK to confirm the setting.
5. Pressing the“MODE”Button in Ratio Mode will exit Ratio Mode and return to
Standard Mode.
Setting the master flash:
1. Press Function Button 4 until the LCD displays
. Pressing Function
Button 1 (underneath
/
) can switch on (
) or switch off (
) the
master flash.
Please note
The flash on camera (M) is not part of the ratio calculation. Power for the local
flash is controlled independently.
Flash Zoom adjustment in Odin II TX Mode