7
. Installing the Battery
12
1. If the meter is on, turn the meter
off by pressing and holding the
“
M
” button for two seconds.
2. Open the battery cover on the
back of the meter by pushing the
arrow marked on the battery cover.
3. Remove the two used batteries
and replace with two (2) new 1.5V
AAA alkaline batteries. Put the
battery cover back and slide into
the battery cover slot. You will
hear a beep sound if the battery is
installed correctly.
(Please see Figure 7-1.)
(Please see Figure 7-2.)
(Please see Figure 7-3.)
Important:
1.It is suggested that you replace the batteries when battery
icon appears empty. You must replace the batteries when
E_3 error message is displayed on the screen.
2.Replacing the batteries will not delete the stored
testing results or any meter settings
EXCEPT time and date.
You will need to reset the time and date after the batteries
have been replaced.
3.Please dispose of used batteries according to your local
ordinances.
Figure 7-1
Figure 7-3
Figure 7-2
