will
see the hour segment
“
00:00” flashing
on the screen. Press the “
Up
” or “
Down
”
key until the desired hour appears on the
screen and then press
“
C
” key to confirm
the hour setting. Each time you adjust the
hour, you will hear: “
The hour is xx am or
pm,
” if the voice is on. Then the minute
segment “00:00” will be flashing on the screen.
Press the “
Up
” or “
Down
” key until the desired reminder minute
appears on the screen. Each time you adjust the minute, you will
hear: “
The minute is xx.
” Press “
C
” key to confirm the setting.
(Once the Alarm Reminder is set, the meter will beep for 60
seconds every day at the set Alarm Reminder time: you can press
C key to stop the beeping sound.) If you have set the alarm to 8:45
am, You will hear:
“
Alarm Reminder is set to 8:45 am.
”
(Please see Figure 9-10.)
Figure 9-10
:
0845
AM
SET
SET
SET
SET
SET
SET
Figure 9-11
Figure 9-12
8.Set the measurement unit - Press
“
U
p
” or “
Down
” to toggle between
the selection of “mg/dL” and “mmol
/L.” The LCD screen will display
either “mg/dL” or “mmol/L” when
pressing “
Up
” or “
Down
” key. Each
time you press “
Up
” or “
Down
”, you
will hear: “
measurement unit in
milligrams per deciliter
” or
“
measurement unit in millimole per
liter
” if the voice is on. Press “
C
” key
to confirm the measurement unit
selection. (Please see Figure 9-11, 9-12.)
Then the screen will show a flashing “dEL” and you will
hear: “
Ready to delete memory records. Press the down
button to delete all records.
” (Please see Figure 9-13.)
If you decide not to set the alarm after you first hear: “
Please
set alarm,
” press the “
Up
” or “
Down
” key until the alarm
icon disappear from the screen and the meter becomes silent.
Then press “
C
” key to exit the alarm setting. You will then
see a “mg/dL” or “mmol/L” is flashing on the upper left
corner of the LCD screen. And that means you are ready to
set the measurement unit.(Please see Figure 9-11.)
You will hear: “
Please set the unit.
”
18
