IMPORTANT!!!
1. You must press the C key only once to set the meter in
the control solution mode before running the test.Do not
perform the blood test in control solution mode if you want
to save the test result in memory.
2. Use only
Smartest
control solution with the
Smartest
Activa
glucose meter.
3.
Smartest
control solutions are used to check that the
meter and the test strips are working together as a system
and that you are performing the test correctly.
4.
Smartest
control solution contains a known amount
of glucose that reacts with test strips. The Medium and High
level control solutions are intended to check the monitoring
system in different measurement ranges.
5. Shake the vial, discard the first drop of control solution,
and wipe off the dispenser tip to ensure a good sample and
an accurate result.
6. Use only for 3 months after first opening. Record the open
date on the control solution vial. Discard after 3 months.
7. Compare your control solution test results with the
expected range printed on the test strip vial label. If your
glucose control results fall outside the expected range,
repeat the test. Results that repeatedly fall outside the
expected range may indicate:
(1) You may not be doing the test correctly; repeat the test,
by shaking the control solution vial well and carefully
following instructions. Please make sure the test is done
within the temperature range.
(2) The control solution is expired or contaminated.
(3) The test strips are damaged or outdated.
(4) Meter malfunction.
21
