1
2
.
Recalling
the Memory
and
Viewing the Average
A. Using the Meter Memory
The test results for blood sample will be stored in the
memory automatically. The meter can store up to 500 of
the most recent test results. You can also view the average
of test results for various periods of 7, 14, 28, 60 and
90 days. The control solution test results will not be
stored in memory.
(
Note:
Please make sure that you press
C key when you run a Control Solution test, so that the
control test result will not be added to memory.)
Figure 12-1
Figure 12-2
1.With meter off, press M key to turn on the meter, after
a brief full screen display and you will hear: “
Recalling
the memory,
” the meter will display the total number
of test data stored in memory. Then the screen will
display “
001
” as the sequential number of the most
recent test result in memory. The stored test data will
be displayed next. If there are no stored results in the
meter, “---” will be displayed on the screen and you
will hear: “
Zero memory
.” The meter can be turned
off by pressing and holding the M key for 2 seconds,
or the meter will turn off automatically after 20 seconds
if no action is taken. You will hear: “
Goodbye
” when
the meter is off.
(Please see Figure 12-1, 12-2.)
B. Recalling the Test Results from the Meter Memory
25
