9
8. Using the Check Strip
Check your meter with the check strip when it is new
and whenever you want to perform a quality control
check on the meter.
1.
_ _
Please make sure there is a code key inserted. It does
not matter what code number it is.
2. Insert the “L” side of the check strip as shown below.
The meter will turn on automatically with a beep.
3. After the code number of the code key is displayed,
the meter will start to count down for 15 seconds and
then _ _ will appear with two beeps.
4. Insert the “H” side of the check strip, the meter should
display
.
