background image

________________________________________________________________________ 

 

CLEER Switch – Quick Install Guide 

Interface: 
Ethernet uplink 
(Trunk IP) 

Maximum 2 uplinks, each 1Gb/s (full duplex), either: 

 

2 mini-GBIC ports: 1000 Base-TX/SX/LX/EX/ZX/LHX (determined by SFP, transceiver 
module installed), Ethernet IEEE 802.3z, fiber optic cable, or 

 

2 RJ45 ports: 10/100/1000 Base-T autosensing, independent speed selection, Ethernet 
IEEE 802.3, CAT5e copper cable 

Interface: 
Downlink (PoE 
and IP to 
adapter) 

24 x BNC Jacks 
Speed: 100Mb/s (full duplex) 
PoE power: 30 Watts Maximum (see Appendix) 
Maximum distance:  

1500' (457M) over RG59 COAX Cable 
1600’ (487M) over RG6 COAX Cable 

              2000’ (609M) over RG11 COAX Cable 
24 x Status LEDs: 
              Configuration options: Link Activity / Link / Off 

Management 

1 LAN port (MGMT): RJ45, 10/100 Base-T autosensing, IEEE 802.3 
1 UART console port: RJ45 (RJ45 to DB9 cable included) 

Power supply 

Hot-Swappable Power Supply Unit 
Autosensing 100-240VAC, 50/60 Hz 
Power output: 500W max at 100VAC, 1000W max at 240VAC 

Power 
consumption 

16.5W 

Power injection 
(PoE) 

DC voltage: 48VDC to 56VDC 
Endpoint devices must be compliant with IEEE 802.3af/at 

PowerWISE

®

 

power sharing 

2 male connectors (rear), DC IN and DC OUT: 48VDV to 56VDC 

Operating 
temperature 

-10° C to 50° C 

Humidity 

10% to 95% (non-condensing) at 35° C 

 
 

EC-Link 

Dimensions 

2.1cm x 3.2cm x 8.8cm (HxWxD); 0.83” x 1.23” x 3.46” (HxWxD) 

Weight 

42 g (1.48 oz.) 

Mounting 

Inline between the CAT5 cable (to IP endpoint) and the COAX cable (to CLEER/EC 
Switch) 
Inline between the CAT5 cable (to IP endpoint) and the COAX cable (to a second EC-Link 
when used as an Extender) 

COAX Interface 

1 BNC port: COAX cable – RG59, RG11, RG6.  

Ethernet 
Interface 

1 RJ45 port: 100 Base-T, IEEE 802.3af/at 

Power injection 
(PoE) 

DC voltage on RJ45 port: 

 

37V – 56V  

Endpoint devices must be compliant with IEEE 802.3af/at 

DC IN (Screw 
Terminal) 

Optional  

 

48V – 56VDC via an external AC/DC Power Adapter (IEC Class II isolated only) 

Power 
consumption 

0.9W 

Operating 
temperature 

-50° C to +70° C 

Humidity 

10% to 95% (non-condensing) at 35° C 

 
 

Summary of Contents for CLEER24









Reviews: