4
TrueCPR Device Instructions for Use
Using the TrueCPR Device
Using the TrueCPR Device
Performing CPR
To use the TrueCPR device:
1 Confirm patient is in cardiac arrest.
2 Remove the device from the carrying bag.
3 Separate the chest pad and back pad.
4 Press the
(POWER)
button to turn the device on.
The calibration screen appears.
IMPORTANT!
Do not press on the chest pad until calibration is complete and feedback screen
appears (approximately 3 seconds).
Back Pad
Item
Description
1
Battery Readiness Indicator:
Flashing LED on back pad handle indicates
battery capacity is sufficient for at least 25 minutes of operation.
Note:
LED flashes approximately once every 4 seconds.
2
USB Port Cover:
Provides access to USB port. Use a coin or similar tool
to open.
3
Battery Compartment:
Holds two nonrechargeable Duracell
®
DL123
batteries. Use a coin or similar tool to open.
1
2
3