Controls and Indicators
4
PHYSIOTHERM-S
2
Controls and Indicators
As its LCD is divided in different function fields,
PHYSIOTHERM-S
allows for clear
and easy operation.
The metal housing protects the electronic components and simplifies cleaning.
Safety-related components are continuously monitored by the microprocessor,
erroneously initiated operating steps are suppressed, a self-test routine is performed
after switching on and possible malfunctions are displayed.
2.1
Function of Controls and Indicators
In the following section we will introduce some of the controls of
PHYSIOTHERM-S
.
The numbers in angle brackets refer to the
Instrument Overview
at the beginning of
this manual.
2.1.1
Display <2>
On the
display <2>
, you can select all of the instrument’s menus and parameters
on different levels. The selection is carried out with the
data selector <3>
.
2.1.2
Data Selector <3>
Use the
data selector <3>
to select the therapy
parameters and to operate the instrument by means
of the cursor. You can move the cursor to the other
menu items by turning the selector to the right or
left. To select a menu, simply press the selector. To
select a parameter, move the cursor to the respective
field by turning the selector. After pressing the
selector, the cursor will start flashing. You will then
be able to select the parameters by turning the
selector and confirm the selected value by pressing
the selector again (cursor stops flashing). The
modified values are displayed
at the respective
position of the
display <3>
.
