Service, Repairs, Maintenance
PHYSIOTHERM-S
49
11
Service, Repairs, Maintenance
The manufacturer is only obliged to guarantee the safety features of the instrument
in its original state.
The instrument must be operated in accordance with the
Operating Instructions
.
Repairs to the instrument may be only performed by parties duly authorized by
PHYSIOMED ELEKTROMEDIZIN AG
. Any repairs performed by an authorized agent
must be accompanied by written certification, describing the nature and extent of
the repairs undertaken, as applicable with details regarding changes to nominal
operating values or the operational range. The certification must also contain the
date performed, the name of the repair company and the signature of the
repairman.
When defective, Components affecting the safe operation of the instrument must
be replaced by manufacturer’s original parts.
In accordance with the law concerning medical products, the unit must be entered
in a medical products log. Safety inspections and repairs must be entered with the
date of performance in the medical products log.
All service (safety inspections, voltage switching between 115 V and 230 V, repairs)
may be performed only by service personnel authorized by the manufacturer! Do no
perform unauthorized repairs under any circumstances!
12
Cleaning and Disinfections
To clean the device:
(1)
Switch off the power switch.
(2)
Unplug the power plug from the socket before cleaning or disinfecting the
unit!
(3)
Clean and disinfect the unit and accessories on all external surfaces with a
slightly damp cleaning cloth. Use a commercially available cleaning agent that
is intended for use in medical facilities.
(4)
Wait until the unit is completely dry before operating it again.
Under no circumstances may liquid penetrate the openings on the unit, e.g. the
connecting sockets of the electrode cables! Therefore, do not use cleaning or
disinfectant sprays! The unit, electrodes and cables may not be sterilized using
steam or gas!
Never clean the unit with abrasives, disinfectants or solvents that could scratch the
housing or damage the unit.
