29
Revision 3
Janvier 2015
Owners manual
ENGLISH
9. Tilt-in-Space
9.1 Positive Tilt
The Neox™ can be tilted backward, in a positive tilt, please follow these steps
to do so:
1. Activate the wheel lock
B
before positioning the NEOX™ in a positive tilt.
(Figure 21). Refer to section 14.3;
2. Tilt the NEOX™ by simultaneously pressing the 2 handles
A;
3. Release the handles to the desired tilt;
4. If needed, the maximum positive tilt can be limited by a locking collar
C
installed on the interior part of the cylinder (see next page);
5. The tilt in a straightened position can, meanwhile, be controlled by an
adjustment block
D
(figure 39-a). The angle can be adjusted at 0 °, 5 ° or
10° (figure 39-b).
Figure 36 : Operation of the Positive Tilt
B
A
Consult Appendix A for tilt limitations.
