NEOX
TM
Dynamic wheelchair
ENGLISH
36
Rear Caster Tilt Mechnism (6-wheel option)
The Rear Caster Tilt Mechanism makes it easier for the attendant to move the
occupant around on a daily basis. With a simple foot movement, the rear caster will
tilt, creating an angle that facilitates surmounting obstacles.
Installing the rear cater tilt mechanism
1. Insert strap
A
through clamping ring
B
and
eyelet
C
.
2. Fold the strap over and reinsert through
clamping ring
B
.
3. Adjust strap tension.
4.
Once the desired strap tension is reached,
tighten screw
D
with a 3mm Allen Key.
Clearing obstacles with the rear caster tilt mechanism
WARNING
For safety reason, it is important to return the seat parallel to the ground
and to remove the occupant’s weight from the rear casters, before using
the rear caster tilt mechanism to clear an obstacle.
1. Move the wheelchair as near as possible to
the obstacles.
2. Position the back post
A
upright to
remove the occupant’s weight from the
rear casters.
