Owner’s Manual
ENGLISH
5
7
Armrest
'' U '' type armrest
The « U » type armrest is made with a foam padding to improve comfort and can be
flipped back to facilitate transfers.
The « U » type armrest offers a height adjustment range between 6 ¾'' and 16 ½''
(152 mm and 406 mm). Adjustable in increments of ½''.
Installing the '' U '' type armrest
1. With a 4mm Allen key, unfasten
screw
A
while holding nut
B
in place
with a 10mm wrench.
2. Position receiver
C
on the
positioning plate.
3. Reinsert screw
A
through the
receiver, positioning plates and seat
rail.
4. Place nut
B
on screw
A
and firmly
tighten using a 4mm Allen key and a
10mm wrench to hold nut
B
in place.
5. With two 10mm wrenches, place
receiver
F
at the front of the seat rail.
Flipping back the ''U'' type armrest
1. Press lever
G.
2.
Flip-back armrest.
Adjusting the ''U'' type armrest height
1. Press lever
H
.
2. Raise or lower armrest.
3. Release lever
H
to lock armrest in
place once the desired height is
obtained.
Note –
Make sure armrest is fully
engaged in the adjustment holes and
that set screw
I
is firmly tightened.
R
e
vision 0
July
202
2
