NEOX
TM
Dynamic wheelchair
ENGLISH
5
8
'' T '' type armrest
The ''T'' type armrest is made with a foam
padding to improve comfort and can be
removed to facilitate transfers.
The ''T'' type armrest offers a height
adjustment range between 8'' and 15 ½''
(200 mm and 381 mm). Adjustable in
increments of ½''
Installing the '' T '' type armrest receiver
1. Position receiver
A
on the seat rail and
insert screws
B
through the receiver and
seat rail.
2. Place nut
C
on screw
B
and firmly
tighten using a 5mm Allen key and a
10mm wrench to hold nut
C
in place.
Installing the '' T '' type armrest
1. Press and hold down lever
D
.
2. Insert armrest into receiver
A
.
3. Release lever
D
to lock armrest in place.
Adjusting the '' T '' type armrest height
1. Press and hold lever
E
.
2. Raise or lower armrest.
3. Release lever
E
to lock armrest in place
once the desired height is obtained.
Note -
Make sure the armrest height adjustment lock pins are fully engaged in the
adjustment holes and that set screw
F
is firmly tightened.
Adjusting the clothing guard height
1. With a 4mm wrench, loosen set screw
G
.
2. Position clothing guard
I
at the desired height.
3. Firmly tighten set screw
G
.
Removing the '' T '' type armrest
1. Press and hold lever
D
.
2. Lift up and remove armrest.
