NEOX
TM
Dynamic wheelchair
ENGLISH
6
4
Attendant Wheel Lock (4-wheel or 6-wheel option)
Installing the attendant wheel lock
1. Insert parts
A
and
B
into tube
C
and adjust the width of the
attendant wheel lock
according to the width of the
wheelchair.
2.
Position and adjust bracket
E
on the side frame rails.
3. With two 13mm wrenches,
tighten bolts
F
firmly.
4. Center tube
C
and then firmly
tighten screws
D
with a 10 mm
wrench.
Adjusting the brake force
1. With two 13mm wrenches, remove bolts
F
.
2. Move the attendant wheel lock brackets forward or backwards to obtain the
required brake force.
-
To increase brake force, move attendant wheel lock backwards closer to
the propulsion wheel.
-
To reduce brake force, move wheel lock further from propulsion wheel.
3. Reinsert bolts
F
and firmly tighten.
Note –
Make sure the wheel lock pressure bar
G
is placed at approximately ½"
from the propulsion wheel, when disengaged.
Using the attendant wheel lock
-
To lock wheels, push down
on side
H
of the foot
operated lever.
-
To unlock wheels, push
down on side
I
of the foot
operated lever.
