Owner’s Manual
ENGLISH
39
Installing caster wheels
1. Determine the correct position of the caster
wheel (see section
Seat-to-Floor Height
).
2. Insert screw
A
in the appropriate adjustment
hole
with spacers
B
placed in between the
caster wheel and the fork
.
3.
Install nut
C
onto screw
A
and tighten with
two 13mm wrenches.
Note
- Once tightened, make sure the wheel rotates easily.
WARNING
• Changing a front caster wheel for a wheel with a different width may
require replacing the fork.
• All modifications made to your wheelchair must be performed by a
qualified technician. Failure to observe this warning may lead to
serious injury to the occupant or any other individual who is near the
wheelchair.
• If your wheelchair is equipped with pneumatic caster wheels, check
tire pressure weekly, as recommended in the
Maintenance Checklist
Never use your wheelchair without properly inflate tires, the
recommended tire pressure is indicated on the outer tire. Overinflated
tires can burst, while under inflated tires can deform. Tire deformation
can cause the wheel to spin unexpectedly, this can potentially lead to
a loss of control of your wheelchair. Proper inflation will extend the
lifespan of your tires and improve ease-of-use.
R
e
vision 0
July
202
2
