16
XL5 / XL5 CI wheelchair
ENGLISH
5.2 Seat Height Adjustment Using the Rear Wheels Anchoring Mechanism
When a modification of the rear wheels is done on the anchoring mechanism,
it could be necessary to change the size or position of the front wheels. Refer to
section 5.3. Please refer to seat height tables in section 17.
Seat height adjustment using the rear wheels anchoring mechanism :
1. Remove the rear wheel with the quick release push-button, refer to section 6.1.
2. Using two 10 mm wrenches, unscrew screws
A
3. Adjust anchoring mechanism to the desired position.
4. Replace screws
A
, tighten.
5. Reinstall the rear wheels.
6. If necessary, modify the front wheel’s position or size.
Figure 11 : Seat Height Modification
A
A
A
A
Warning
After any adjustments, make sure all attaching hardware is tightened
securely - otherwise injury or damage may occur.
Warning
Ensure both front casters are the same size and are installed into the same
respective mounting hole before using the wheelchair - otherwise injury
or damage may occur.
