33
Revision 5
December 2015
Owners manual
ENGLISH
11.3 Angle and Depth Adjustable Footplates (optional)
Angle Adjustment
1. With a 5 mm Allen key, loosen screw
A
2. Turn the footplate around the footrest mechanism to
adjust the footplate to desired angular position.
3. Re-tighten once the adjustment is done.
Depth Adjustment
1. With a 5 mm Allen key, loosen screw
A
2. For a depth adjustment, slide forward or
backward the footrest on its rail.
3. Re-tighten once the adjustment is done.
Figure 34: Footplates Adjustment
11.4 Footplate Vertical Adjustment
Only available with the angle and depth adjustable footplates
1. Position the Allen Key, at the opposite of the anchor block.
2. With a ¼” Allen key screw or unscrew the vertical adjustable screw
A
under
the footplate.
Note - Screw the vertical adjustable screw
A
to decrease the angle
B
and
unscrew the screw
A
to increase the angle
B
.
Figure 35: Footplate Vertical Adjustment
A
B
A
