background image

Installation of the Grabber Card

                                                                                                                                                

                                                                                                                                                

 PHYTEC Meßtechnik GmbH 2004     L-608e_4

33

2

 

Installation of the Grabber Card

The Grabber card  converts analog signals from the camera and
presents these signals in a digital form to the computer and software.
If you are not familiar with insertable cards in the PC/10plus insert
card series, please take the time to familiarize yourself with the
instructions and equipment. The following tasks are not difficult, but
must be done with caution.

2.1

 

Installing the Grabber Card

Caution:
The PC/104plus-System must be isolated from the supply voltage.
Please ensure that the device does not have any power supplied to it.

The specifications instruct you to install the card on the virtual
positions (slots or Device-ID) 1-4. Select one of these positions, be
sure, however, that it is a position with master capability (in some
systems not all systems are master capable).

 

Two cards cannot have the same position (for example, two cards
use position 3)

 

Once a position has been selected, the selection must be set using
Jumper JP201 prior to installation (see Figure 17).

Figure 17:

Jumper Settings JP201 (Slot Selection)

Summary of Contents for eGrabber-4plus















































































































































































































Reviews: