pciGrabber-4x4
10
PHYTEC Messtechnik GmbH 2008 L-720e_0
2.3
Field of Applications and Safety Regulations
Please pay attention to the specified operation directives of the
pciGrabber-4x4. Before starting operation please read carefully the
manual.
•
The pciGrabber-4x4 is designed for the digitization of video
signals from standard TV-cameras. Signals from composite-video
cameras can be processed, which comply with CCIR B, G, H, I and
the sub standard CCIR B, G, H, I/PAL. In addition signals
compliant to CCIR M/NTSC can be applied. Also separate luma
and chroma signals from cameras, which correspond to the S-video
standard are applicable.
-
The digitization is achieved in real time. The image data are trans-
ferred via the PCI-bus of the PC. The transfer rate corresponds to
the access time specified for the PCI master slot.
-
The effective transfer rate must be re-oufficient to handle the
volume of the image data, otherwise information might be lost.
•
The pciGrabber-4x4 is determined for the utilization with a
standard PC, which might be an office computer with an usual
housing. The Grabber must have a reliable connection with the
housing and the ground (PE).
-
The board is designed to operate in dry and dustless environment.
For applications in industrial environment you have to consider to
take additional protective arrangements especially against radio
interference and safety hazards.
•
The application of the Grabber board in safety areas, for aviation
and space and for nuclear or military purposes requires our
examinations and our agreement.
•
For industrial applications all rules for prevention of accidents and
the rules of the employer’s liability insurance association for
electrical facilities are to observe.
