pciGrabber-4x4
22
PHYTEC Messtechnik GmbH 2008 L-720e_0
3.2
Installing the Driver
Connect the computer to the power supply and turn the computer
on. During start-up the computer’s BIOS should automatically
recognize the card.
Two possibilities exist now:
1.
Either the operating system recognizes the card and searches for
the driver or
2.
the operating system does not automatically recognize the card
(i.e. Windows‘ NT) and the user must manually install the driver.
Depending on the type of operating system installed on the computer,
installation occurs as follows:
•
Windows 2000/XP/VISTA
TM
:
After the computer has recognized the card, the user is offered the
option to install the driver.
Select the „
Search for the best driver for the device“
option
from the
Hardware Assistant
window,
,
and then confirm by selecting
OK.
In
the next window that will appear, select
State a Position.
Now place
the
PHYTEC Vision Utilities
CD into the CD-ROM drive. Select
Search
, and in the window that will appear, select the CD-ROM drive.
Change the path to
pciGrab4\driver\win2K_98.
Confirm by
selecting
OK.
A list appears naming the drivers found on the CD. Select
PHYTEC
PCI-Grabber
from the list.
The CD will automatically install the driver onto the computer.
Now the driver has been successfully installed.
Please
refer now to
section 3
. Then
refer to
section 5
to find
information on how to install the demo software.
