Delivery Contents / Technical Data
PHYTEC Messtechnik GmbH 2008 L-720e_0
55
S
ta
rt-
U
p
The
hue
control makes only sense for the NTSC-system. This control
serves for the correction of the color tone, in case a phase shift has
occurred during transmission. Those interference’s can only be
present in NTSC-systems. The PAL-system corrects color tone
failures automatically, so that the hue control has no effect.
Note:
Modification of the hue (i.e. white balance) can equally be done on
NTSC and PAL systems by moving the saturation sliders separately
(in general it is better to midify the white balance at the camera or
video source if possible).
5.4
Additional Functions Under Image
•
Using the
Single Image
entry, a snapshot is taken and displayed on
the screen. In this mode, the Grabber only performs one
digitization.
•
The parameter
Image Settings
defines the image.
•
Using the parameter
Live Image
, a live image can be displayed on
the monitor.
Image settings
also defines the image in this mode.
•
Snapshots can be taken during live operation using the
Snapshot
option
.
•
The current image will be displayed in a new window. Multiple
snapshots can be made.
•
Snapshot-Windows that appear on the screen are automatically
numbered.
•
Using the pre-configured parameters in
Image Settings, Open
Image on Start
enables a live image from the video source to be
displayed on the monitor after every program start.
•
Adding the demo program to the auto start group enables the
computer, after start-up, without intervention from the user, to
display a live image, with the pre-configured parameters, on the
monitor.
