PCM-072/phyCORE-AM64xx System on Module
L-860e.A0
© PHYTEC America L.L.C. 2022
95
13 Additional Information
Members of PHYTEC's phyCORE
®
product family can be populated with different processors and offer various functions
and configurations. PHYTEC supports a variety of ARM-based and other microprocessors in two ways.
1.
As the basis for PHYTEC development kits and Single Board Computers, which serves as a reference and evaluation
platform.
2.
As insert-ready, fully functional phyCORE
®
OEM System on Modules (SOMs) and phyBOARD Single Board Computers
(SBCs), which can be incorporated directly into the user’s hardware design.
https://PHYTEC.com/design-services/
Declaration of Electromagnetic Conformity of the
PHYTEC phyCORE-AM64xx System On Module
PHYTEC System on Modules (SOM) and Single Board Computers (SBC) are designed as subcomponents for integration in
electrical devices.
Combined with PHYTEC Carrier Boards, PHYTEC SOMs can be used as dedicated Evaluation Boards (i.e.: for use as a test
and prototype platform for hardware/software development) in laboratory environments.
CAUTION:
PHYTEC products lacking protective enclosures are subject to damage by ESD and, hence, may only be
unpacked, handled or operated in environments in which sufficient precautionary measures have been taken
in respect to ESD-dangers. It is also necessary that only appropriately trained personnel (such as electricians,
technicians, electronic manufacturing personnel and engineers) handle and/or operate these products.
Independent research indicates that approximately 70% of all EMI problems stem from insufficient grounding of electronic
components in high frequency environments. The phyCORE board design features an increased pin package that dedicates
approximately 40% of all connector pins to ground. This improves EMI and EMC characteristics and makes it easier to
design complex applications meeting EMI and EMC guidelines using phyCORE boards, even in high noise environments.
PHYTEC products fulfill the rules and regulations of the European Union’s Directive for Electromagnetic Conformity and
the Federal Communications Commission Title 47 CFR Part 15 Subpart B only in accordance with the descriptions and rules
of usage indicated in this hardware manual, particularly in respect to the external SOM connector, power interfaces and
interfaces to host systems for programming.
