5 Installation
20
Version: 1.0.1
MP158D
L-731 / V-731 Precision XY Positioner
Tools and accessories
Mounting accessories; in the scope of delivery (p. 12)
−
4 socket head cap screws, ISO 4762 M6x35
−
2 dowel pins, ISO 8734 - 6 m6 × 10, for use as locating pins
Allen wrench AF 5
Hex key, AF 3
Mounting the positioner onto a surface
Figure 4: Remove the handle and the transport lock
1
Screw for the handle
2
Handle
3
Perforated plate for the transport lock
4
Wing screw for the transport lock
5
Screw for the transport lock
1.
Remove both handles: Loosen the screws for the handles (see figure above).
2.
Remove the screw and both wing screws of the transport lock (see figure above).
3.
If you use locating pins to align the positioner:
a)
Insert the locating pins into the respective holes in the surface.
b)
Place the positioner on the surface so that the locating pins are inserted into the
corresponding locating holes on the other side.
