background image

User Manual

  

A311D0002 Rev 2.0  

11-Nov-2021 
 
 

 

 

Page 26 of 26 

 
 
 

 
 

PI (Physik Instrumente) L.P. 
16 Albert Street, Auburn, MA 01501 
Tel: 508-832-3456  Fax: 508-832-0506   
Email: air@pi-usa.us 

11.  EC Declaration of Conformity  

For the model A-311 (all options and configurations), an EC Declaration of Conformity has been issued in 
accordance with the following European directives:  
 

  2004/108/EC, EMC Directive 

  2014/35/EU, Safety/Low Voltage Directive 

  2011/65/EU, RoHS Directive 

 
The applied standards certifying the conformity are listed below. 
 

  EMC: EN 61326-1:2013 

  Safety/LVD: EN 61010-1:2010 

  RoHS: EN 50581:2012 

 
If an electrical operating device is designed to be integrated in another electrical operating device: The operator 
is responsible for a standards compliant integration of the electrical device into the overall system. 

12.  Old Equipment Disposal 

In accordance with EU law, electrical and electronic equipment may not be disposed of in EU member states via 
the municipal residual waste. 
 
Dispose of your old equipment according to international, national, and local rules and regulations. 
 
In order to fulfil its responsibility as the product manufacturer, Physik Instrumente (PI) GmbH & Co. KG 
undertakes environmentally correct disposal of all old PI equipment made available on the market after 13 
August 2005 without charge. 
 
Any old PI equipment can be sent free of charge to the following addresses: 
 
Physik Instrumente (PI) GmbH & Co. KG 
Auf der Roemerstr. 1 
D-76228 Karlsruhe 
Germany 
 
PI (Physik Instrumente) L.P. 
16 Albert Street 
Auburn, MA 01501 
USA 
 
 
 

 

   

Summary of Contents for A-311.F Series



























Reviews: