B E W E G E N | P O S I T I O N I E R E N
MS242EK 2.1.0 10/2019. 2.0
Page 1 of 8
Digital Motor Controllers and Drivers
Short instructions
C-663 / C-863 / C-867 / C-877 / C-884 / E-861 / E-871 / E-872.401 / E-873
M O T I O N | P O S I T I O N I N G
User Information
These short instructions contain an overview of the most important safety instructions and hand-
ling instructions for installation and startup of motor controllers and motor drivers (hereinafter
referred to as "electronics") with the above-mentioned product numbers.
Subject to change. These short instructions are superseded by any new release. The latest respec-
tive release is available for download on our website.
Downloading and Reading the Manual
The actions during installation, startup, operation, adapting the settings, and maintenance require
additional information from the manuals for the electronics and/or the positioner.
Manuals may be titled as follows: „User Manual“, „Technical Note“.
Downloading the Manuals from the Website
1. Open the website
www.pi.ws
.
2. Search the website for the product number (e.g., C-663.12) or the product family (e.g., PICMA®
Bender).
3. Click the corresponding product to open the product detail page.
4. Enter the product number up to the period (e.g., C-663) into the search field.
5. Click
Downloads
.
The manuals are shown under
Documentation
.
6. Click the desired manual and fill out the enquiry form.
The download link will then be sent to the email address entered.
If you cannot find the manual you are looking for or if you have any questions: Contact our custo-
mer service department via service@pi.de.
