2 Safety
6
Version: 1.0.1
PZ250E
E-836.1G Piezo Amplifier
Install the E-836.1G near the power source so that the power plug can be
quickly and easily disconnected from the mains.
Use the supplied components (power supply, adapter and power cord) to
connect the E-836.1G to the power source.
If one of the supplied components for connecting to the power source has to
be replaced, use a sufficiently dimensioned component.
If a protective earth conductor is not or not properly connected, dangerous touch
voltages can occur on the E-836.1G in the case of malfunction or failure of the system.
If touch voltages exist, touching the E-836.1G can result in serious injury or death from
electric shock.
Connect the E-836.1G to a protective earth conductor (p. 13) before start-up.
Do
not
remove the protective earth conductor during operation.
If the protective earth conductor has to be removed temporarily (e. g. in the
case of modifications), reconnect the E-836.1G to the protective earth
conductor before starting it up again.
2.3 Organizational Measures
User manual
Always keep this user manual available by the E-836.1G.
The latest versions of the user manuals are available for download (p. 3) on
our website.
Add all information given by the manufacturer to the user manual, for example
supplements or Technical Notes.
If you pass the E-836.1G on to other users, also turn over this user manual as
well as all other relevant information provided by the manufacturer.
Only use the device on the basis of the complete user manual. If your user
manual is incomplete and is therefore missing important information, serious
or fatal injury as well as property damage can result.
Only install and operate the E-836.1G after having read and understood this
user manual.
Personnel qualification
Only authorized and qualified personnel must install, operate, maintain and clean the
E-836.1G.
