3
Safety
3.1
Intended Use
The L-505.021212 is a laboratory device as defined by DIN EN 61010-1. It is intended for
indoor use and use in an environment that is free of dirt, oil, and lubricants.
In accordance with its design, the L-505.021212 is intended for positioning, adjusting and
shifting loads in one axis at various velocities. The L-505.021212 is not intended for
applications in areas, in which a failure would present severe risks to human beings or the
environment.
The intended use of the L-505.021212 is only possible when completely mounted and
connected. The L-505.021212 must be operated with
electronics are not in the scope of delivery of the L-505.021212.
The L-505.021212 may not be used for purposes other than those stated in this user manual.
The L-505.021212 may only be used in compliance with the technical specifications and
instructions in this user manual.
3.2
General Safety Instructions
The L-505.021212 is built according to state-of-the-art technology and recognized safety
standards. Improper use of the L-505.021212 may result in personal injury and/or damage to
the L-505.021212.
►
Use the L-505.021212 only for its intended purpose and if it is in perfect condition.
►
Read the user manual.
►
Eliminate any faults and malfunctions that are likely to affect safety immediately.
The operator is responsible for correct installation and operation of the L-505.021212.
3.3
Organizational Measures
3.3.1
User Manual
►
Always keep this user manual available with the L-505.021212. The latest versions of the
user manuals can be
.
►
Add all information from the manufacturer such as supplements or technical notes to the
user manual.
►
If you give the L-505.021212 to a third party, also include this user manual as well as other
relevant information provided by the manufacturer.
►
Only use the device on the basis of the complete user manual. Missing information due to
an incomplete user manual can result in minor injury and damage to equipment.
►
Only install and operate the L-505.021212 after you have read and understood this user
manual.
3.3.2
General Personnel Qualification
The L-505.021212 may only be installed, started up, operated, maintained, and cleaned by
authorized and appropriately qualified personnel.
3 SAFETY
L505M0015EN
‒
3/18/2020
8
M O T I O N | P O S I T I O N I N G