Pin
Function
19
Output: Encoder channel A
20
Output: Encoder channel A (inverted)
21
Output: Encoder channel B
22
Output: Encoder channel B (inverted)
23
Not connected
24
Not connected
25
Ground
26
Input: Encoder power supply
14.2
Drive Properties
If you use third-party control electronics, it may be necessary to adapt the following
operating parameters to the L-505.023212.
Parameters
L-505.023212
Unit
Motor type
DC motor
Drive screw pitch
0.5
mm
Sensor resolution
0.05
μm
14.3
Reference Switch Specifications
Type
Hall sensor
Supply voltage
+5 V
Signal output
Open collector
Signal logic
Direction sensing via different signal levels on the left and
right of the reference switch.
14 APPENDIX
L505M0017EN
‒
3/18/2020
38
M O T I O N | P O S I T I O N I N G
