3 Product Description
N470 Linear Actuator
MP125E
Version: 1.2.0
11
N470 models with clamping shank
The description of the product components is also valid for models with turned cable exit.
Figure 2: Models with clamping shank and standard cable exit (left: N-470.x20; right: N-470.x2V)
1
Screw head
2
Fine-threaded screw (rotating)
3
Base body
4
Clamping shank (9.5 mm diameter, 6 mm clamping width)
5
M9×1 mounting nut
6
Ball tip for connecting to the moving part of the mechanical mounting
7
Unscrew lock (circlip) for fine-threaded screw
8
Product labeling
9
Cable for connecting to the electronics
Directions of Motion
Figure 3: Directions of motion of the N-470
Pay attention to further information on the operating conditions in the "Technical Data" section
(p. 35).
