2 Safety
P54x Nanopositioner
PZ244E
Version: 1.2.0
5
In this Chapter
Intended Use .................................................................................................................................. 5
General Safety Instructions ........................................................................................................... 5
Organizational Measures ............................................................................................................... 7
2.1
Intended Use
The P-54x is a laboratory device as defined by DIN EN 61010-1. It is intended for indoor use and
use in an environment that is free of dirt, oil, and lubricants.
According to its design, the P-54x is intended for fine positioning as well as moving small objects
quickly and precisely. The specifications for the P-54x apply to horizontal mounting. Depending
on the version, moving is done as follows:
Model
Motion
Axis
.2xx
In two axes horizontally
X, Y
.Zxx
In one axis vertically
Z
.Txx
In one axis vertically and in two axes rotationally
Z, θ
X
, θ
Y
The P-54x can only be used as intended in conjunction with suitable electronics (p. 12) available
from PI. The electronics are not in the P-54x's scope of delivery.
The electronics must provide the required operating voltages. To ensure proper performance of
the servo control system, the electronics must also be able to read out and process the signals
from the position sensors.
2.2
General Safety Instructions
The P-54x is built according to state-of-the-art technology and recognized safety standards.
Improper use can result in personal injury and/or damage to the P-54x.
Use the P-54x for its intended purpose only, and only when it is in perfect technical
condition.
Read the user manual.
Eliminate any malfunctions that may affect safety immediately.
The operator is responsible for the correct installation and operation of the P-54x.
2
Safety
