10 Technical Data
P-545 Nanopositioners
PZ272E
Version: 1.1.0
39
P-545.2R8S
P-545.3R8S
Unit
Tolerance
Piezo controller
E-727.3RDA (in the scope of delivery)
Communication interfaces
Ethernet, USB, RS-232, serial SPI high-
speed interface
Analog input / Analog output
D-sub 15
Input via 18-bit A/D converter
Output via 20-bit D/A converter
Command set
PI General Command Set (GCS)
User software
PIMikroMove
Software drivers
NI LabVIEW drivers, shared libraries for
Windows and Linux
Supported functions
Wave generator, data recorder, drift
compensation, macros
* The resolution of the system is limited only by the noise of the amplifier and the measuring
technology because PI piezo nanopositioning systems are free of friction.
** For dynamic operation. Higher dynamics are possible with a reduced load.
All specifications based on room temperature (22 °C ±3 °C).
P-545.3D8S
Unit
Tolerance
Active axes
X, Y, Z
Motion and positioning
Integrated sensor
Piezoresistive
Travel range, closed loop
70 × 70 × 50
µm
Resolution, closed loop*
<1
nm
typ.
Mechanical properties
Resonant frequency, no load
1 (X, Y), 0.8 (Z)
kHz
Push/pull force capacity
100 / 30
N
max.
Recommended load**
0.5
kg
max.
Drive properties
Piezo ceramic
PICMA®
Electrical capacitance
12 (X, Y), 24 (Z)
µF
±20 %
Miscellaneous
Operating temperature range 15 to 40
°C
Material
Aluminum
Mass
1.2
kg
±5 %
Cable length
1.7
m
+10 cm
