3 Product Description
P-62x Positioners
PZ234D
Version: 1.2.0
15
3.5
Suitable Electronics
To operate a P-62x, you need suitable electronics. Selection of the device depends on the
application and the connectors available.
Electronics
Connector*
Channels**
E-505 piezo amplifier module
LEMO
1
E-610 piezo amplifier / servo controller (OEM module) LEMO
1
E-503 piezo amplifier module
LEMO
3
E-663 piezo amplifier
LEMO
3
E-621 piezo amplifier / servo controller module
D-sub 7W2
1
E-625 piezo servo controller (benchtop device)
D-sub 7W2
1
E-665 piezo driver / servo controller (benchtop device) D-sub 7W2
1
E-709 digital piezo controller
D-sub 7W2
1
E-754 digital piezo controller
D-sub 7W2
1
E-727.x • E-727.xAP digital multi-channel piezo
controller
D-sub 25W3
3
E-727.xF digital multi-channel piezo controller
D-sub 25W3
3
E-712 digital piezo controller (modular system)
D-sub 25W3
3/6
* In some cases, adapter cables (p. 15) are necessary for connecting.
** When using single-channel electronics, each motion axis requires its own individual
electronics.
3.6
Accessories
Adapter cables for models with D-sub plug connector(s)
Product number Description
P-895.2D1DDC* Adapter cable D-sub 25W3 (f) and D-sub 7W2 (f) to D-sub 25W3 (m) for
piezo actuator nanopositioning systems with capacitive sensors, 3 channels,
length: 0.3 m.
P-895.2DDC
Adapter cable 2× D-sub 7W2 (f) to D-sub 25W3 (m) for piezo actuator
nanopositioning systems with capacitive sensors, 2 channels, length: 0.3 m.
P-895.3DDC
Adapter cable 3× D-sub 7W2 (f) to D-sub 25W3 (m) for piezo actuator
nanopositioning systems with capacitive sensors, 3 channels, length: 0.3 m.
* 2 channels to D-sub 25W3 (f) and 1 channel to D-sub 7W2 (f) available.
