10 Technical Data
P-62x Positioners
PZ234D
Version: 1.2.0
51
10.3
Torque for Stainless Steel Screws (A2-70)
Screw size
Minimum torque
Maximum torque
M6
4 Nm
6 Nm
M5
2.5 Nm
3.5 Nm
M4
1.5 Nm
2.5 Nm
M3
0.8 Nm
1.1 Nm
M2.5
0.3 Nm
0.4 Nm
M2
0.15 Nm
0.2 Nm
M1.6
0.06 Nm
0.12 Nm
Pay attention to the screw-in depth required for the respective material according to
the VDI directive 2230.
10.4
Maximum Torque on the Platform
The following torque may not be exceeded when mounting a load:
Model
Maximum torque on the platform
P-620.Zxx
0.25 Nm
P-621.Zxx
0.5 Nm
P-622.Zxx
0.5 Nm
All models except
the P-62x.Zxx
The maximum torque on the platform is equivalent to the maximum
torque of the screws used (refer to "Torque for Stainless Steel Screws (A2-
70)", p. 51).
