2 Safety
P-62x Positioners
PZ234D
Version: 1.2.0
5
In this Chapter
Intended Use .................................................................................................................................. 5
General Safety Instructions ........................................................................................................... 5
Organizational Measures ............................................................................................................... 7
2.1
Intended Use
The P-62x is a laboratory device as defined by DIN EN 61010-1. It is intended for indoor use and
use in an environment that is free of dirt, oil, and lubricants.
According to its design, the P-62x is intended for fine positioning as well as moving small objects
quickly and precisely. The specifications for the P-62x apply to horizontal mounting. Depending
on the version, moving is done as follows:
Model
Motion
Axis
P-62x.1x(x)
In one axis horizontally
X
P-62x.2x(x)
In two axes horizontally
X, Y
P-62x.Zxx
In one axis vertically
Z
Vertical mounting is only possible under certain conditions.
The P-62x can only be used as intended in conjunction with suitable electronics (p. 15) available
from PI. The electronics are not included in the P-62x's scope of delivery.
The electronics must provide the required operating voltages. To ensure proper performance of
the servo control system, the electronics must be able to read out and process the signals from
the capacitive sensors.
2.2
General Safety Instructions
The P-62x is built according to state-of-the-art technology and recognized safety standards.
Improper use can result in personal injury and/or damage to the P-62x.
Use the P-62x for its intended purpose only, and only when it is in perfect technical
condition.
Read the user manual.
Eliminate any malfunctions that may affect safety immediately.
The operator is responsible for the correct installation and operation of the P-62x.
2
Safety
