Page 3 / 25
2018-11-13
P725T0010, valid for P-725
Physik Instrumente (PI ) GmbH & Co. KG, Auf der Roemerstr. 1, 76228 Karlsruhe/Germany
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,
www.pi.ws
About this Document
Symbols and Typographic Conventions
The following symbols and typographic conventions are used in this user manual:
CAUTION
Dangerous situation
If not avoided, the dangerous situation will result in minor injury.
Actions to take to avoid the situation.
NOTICE
Dangerous situation
If not avoided, the dangerous situation will result in damage to the equipment.
Actions to take to avoid the situation.
INFORMATION
Information for easier handling, tricks, tips, etc.
Figures
For better understandability, the colors, proportions, and degree of detail in illustrations can deviate
from the actual circumstances. Photographic illustrations may also differ and must not be seen as
guaranteed properties.
Safety
Intended Use
The P-725 is a laboratory device as defined by DIN EN 61010-1. It is intended to be used in interior
spaces and in an environment which is free of dirt, oil and lubricants.
Based on its design and realization, the P-725 is intended for positioning and shifting microscope
objectives in one axis.
The P-725 Z drive can be mounted horizontally or vertically. The specifications refer to a vertically
mounted Z drive.
The intended use of the P-725 is only possible in a completely assembled and connected state. The
P-725 must be operated with a suitable controller that is available from PI. The controller is not
included in the scope of delivery of the P-725.
