Technical Note
P726T0001, valid for P-726
ECo/CBo, 4/3/2017
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 3 / 4
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
2.
Insert the turret ring into the knurled ring.
Figure 5: Insertion of turret ring into knurled ring
3.
Screw the turret ring together with the knurled ring clockwise into the microscope (not
shown). Use the narrow face of the flat wrench to engage the wrench slots in the ring.
Grip the tool by hand only.
4.
Affix the PIFOC® to the microscope: Align the PIFOC® with the knurled ring and screw
the knurled ring onto the PIFOC®.
Figure 6: Screwing the knurled ring onto the PIFOC®
5.
Screw the objective into the objective ring of your PIFOC®.
Figure 7: Objective installed in PIFOC®
