2
About this Document
2.1
Objective and Target Group
This user manual contains the information needed for the intended use of the
V-412.xx6025E0.
Basic knowledge of closed-loop systems, motion control concepts, and applicable safety
measures is assumed.
2.2
Explanation of Symbols
This chapter explains the symbols and markings used by PI in their user manuals.
2.2.1
Typographic Conventions
Symbol / label
Meaning
1.
2.
Action consisting of one or several steps with strict sequential order
►
Action consisting of one or more steps without relevant sequential or-
der
■
Lists
p. 5
Cross-reference to page 5
RS-232
Label on the product indicating an operating element (example: RS-232
interface socket)
Start > Settings
Menu path in the PC software (example: to open the menu,
Start and
Settings must be clicked successively)
POS?
Command line or a command from PI's General Command Set (GCS)
(example: command to get the axis position)
Device S/N
Parameter name (example: parameter where the serial number is stor-
ed)
5
Value that must be entered or selected via the PC software
2.2.2
Symbols Used
Symbol / label
Meaning
Hazard symbol for a hot surface
Risk of crushing
General hazard symbol
2 ABOUT THIS DOCUMENT
V412M0008EN
‒
5/11/2020
5
M O T I O N | P O S I T I O N I N G
