5
Unpacking
The positioner is delivered with the transport safeguard installed.
1
2
Figure 4: V-417.xx6211E0 with transport safeguard
1. Transport safeguard
2. Wing screw with M6×10 thread
CAUTION
Risk of crushing by moving parts!
Risk of minor injuries from crushing between the moving parts of the V-417.xx6211E0 or the
load and a fixed part or obstacle.
►
Transport the V-417.xx6211E0 only when the transport safeguard is attached.
►
Bring the V-417.xx6211E0 to the intended place of use. If the V-417.xx6211E0 was supplied
with a carrying aid: Use the carrying aid to transport the V-417.xx6211E0.
►
Remove the transport safeguard afterwards.
Unpack the V-417.xx6211E0 and remove the transport safeguard
1. Unpack the V-417.xx6211E0 with care.
2. Compare the contents with the scope of delivery according to the contract and the
delivery note.
3. Inspect the contents for signs of damage. If any parts are damaged or missing, contact
our
customer service department (p. 24)
immediately.
4. If the V-417.xx6211E0 was supplied with a carrying
: Use the carrying aid to
transport the V-417.xx6211E0 to the intended place of use.
5. If the V-417.xx6211E0 was supplied with ESD protective caps on the connectors: Do not
remove the ESD protective caps.
6. Remove the transport safeguard:
a) Unscrew and remove the wing screw.
b) Remove the transport safeguard.
7. Keep all packaging materials and the transport safeguard in case the product needs to be
returned.
5 UNPACKING
V417M0009EN
‒
4/26/2019
12
M O T I O N | P O S I T I O N I N G
