14.3
Limit switch specifications
Type
Hall sensor
Supply voltage
+5 V
Signal output
0 V / +5 V (TTL level)
Signal logic
N/C contact, NPN
Figure 13: V-417 at the negative limit switch.
Figure 14: V-417 at the positive limit switch.
14.4
NTC temperature sensor
The V-417.xx6211E0 is equipped with an NTC temperature sensor for monitoring the coil
temperature. The electrical resistance of the NTC temperature sensor decreases considerably
as temperature increases. The controller must cut the power supply to the motor (switching
threshold: 511
Ω
) when the critical temperature (110 °C) is reached.
14 APPENDIX
V417M0009EN
‒
4/26/2019
33
M O T I O N | P O S I T I O N I N G
