2
About this Document
2.1
Objective and Target Group
This user manual contains the information needed for the intended use of the
V-417.xx6211E0.
Basic knowledge of closed-loop systems, motion control concepts, and applicable safety
measures is assumed.
2.2
Explanation of Symbols
This chapter explains the symbols and markings used by PI in their user manuals.
2.2.1
Typographic Conventions
Symbol / Label
Meaning
1.
2.
Action consisting of several steps whose sequential order must be ob-
served
■
List item
p. 5
Cross-reference to page 5
RS-232
Labeling of an operating element on the product (example: socket of
the RS-232 interface)
Start > Settings
Menu path in the PC software (example: to open the menu, the
Start
and
Settings menus must be clicked successively)
POS?
Command line or a command from PI's General Command Set (GCS)
(example: command to get the axis position)
Device S/N
Parameter name (example: parameter where the serial number is stor-
ed)
5
Value that must be entered or selected via the PC software
2.2.2
Symbols Used
Symbol / Label
Meaning
General hazard symbol
DANGER
Dangerous situation
Failure to observe can lead to death or serious injury.
►
Measures for avoiding the risk.
WARNING
Dangerous situation
Failure to observe can lead to serious injury.
►
Action to take to avoid the risk.
2 ABOUT THIS DOCUMENT
V417M0009EN
‒
4/26/2019
5
M O T I O N | P O S I T I O N I N G
