8
Maintenance
NOTICE
Damage due to improper maintenance!
Improper maintenance can lead to misalignment and failure of the V-417.xx6211E0.
►
Loosen screws only according to the instructions in this manual or the instructions of our
customer service department (p. 24)
8.1
Cleaning
Requirements
✓
You have disconnected the V-417.xx6211E0 from the electronics.
Other Materials Required
■
Soft, lint-free cloth
■
Mild cleaning agent or disinfectant
If you have any questions on the auxiliary materials recommended for the V-417.xx6211E0,
contact our
customer service department (p. 24)
NOTICE
Damage due to unsuitable cleaning agents!
Some cleaning agents can cause rusting on the V-417.xx6211E0 or dissolve plastics, paints or
adhesives.
►
Do not clean with water or acetone.
Cleaning the V-417.xx6211E0
1. Dampen the cloth with the cleaning agent or disinfectant.
2. Carefully wipe the surfaces of the V-417.xx6211E0.
8.2
Moving the Motion Platform by Hand
It can be necessary to move the motion platform manually to provide access to mounting
holes for mounting screws in the base body of the positioner.
Requirements
✓
You have disconnected the V-417.xx6211E0 from the electronics.
Moving the Motion Platform by Hand
1. Exert a steady force on the motion platform to move it.
8 MAINTENANCE
V417M0009EN
‒
4/26/2019
21
M O T I O N | P O S I T I O N I N G
