5 Installation
30
Version: 1.0.1
MP134E
Q-522 Miniature Stage
Connecting the Q-522.x00 to E-870 drive electronics with
a Mini-DIN 4 socket
1. Connect the Q-522.x00 with the adapter cable:
−
Connect the Sub-D 15 (m) connector of the Q-522 with the connector of
the adapter cable (Sub-D 15 (f)).
2. Connect the adapter cable with the drive electronics:
a) Connect the Mini-DIN 4 connector of the adapter cable with the
Mini-DIN 4 socket of the drive electronics.
b) Take suitable measures to prevent the adapter cable from being
accidentally disconnected.
Connecting the Q-522.x00 to E-870 drive electronics with
a connector strip
Connect the Q-522.x00 to the connector strip of the drive electronics using a
suitable adapter.
5.5.2 Connecting the Q-522 to the Controller
INFORMATION
For information regarding the connection of a vacuum-compatible Q-522, contact
the customer service department (p. 45).
Prerequisites
You have read and understood the general notes on installation.
You have installed the E-871 controller (p. 14).
You have read and understood the user manual of the controller.
The controller is switched off, i. e. the power supply is
not
connected to the
power socket via the power cord.
Tools and accessories
Y adapter cable 7202500043-0015, in the scope of delivery (p. 13).