Page 5 of 30
2.
DANGEROUS AREAS
Areas with danger of crushing
Areas with danger of air ejection
Notes for the final manufacturer of machinery
It is prohibited stopping or passing through the work area of the gripper module. In case of electrical or pneumatic supply
failure, the load handled by the module is released.
Never look and / or insert the hands in cavities, holes or openings (for example: air discharge, openings / holes under the
foam etc.).
The gripping module described in this manual is designed for implementation in industrial systems; therefore, it must not be
used with the conditions other than those specified.
The final evaluation of the safety systems to be applied for starting up the system, after the assembly of the gripping module,
is the task of the final manufacturer of machinery. It is up to the final manufacturer of machinery to report the PPE needed
by the operators who are stationed in the surroundings or the operators who have access to the work area. In addition, the
same manufacturer will certify the final commissioning according to the regulations in force for each individual country.
