9
8
WINDING THE MOVEMENT
Self-winding watches are wound by the movement of the wrist when the watch is worn.
If the watch has not been worn for around 50 hours, wind it by hand with the crown in
position 0, that is turn the crown in the forward direction (around 10 turns of the crown
are sufficient to restart the mechanism).
SETTING THE TIME
Pull the crown out to position 2 then turn it forward or backward to position the hands.
The mechanism is equipped with a balance-stopping device. Pulling the crown to position
2 will stop the movement. Push the crown back to position 0 after the adjustment.
SETTING THE DATE
Pull the crown out to position 1 then turn it forward to select the desired date. Since the
date change occurs at midnight, make sure you distinguish midnight from noon when
proceeding to the adjustment. In order to avoid damaging the mechanism, we advise you
not to adjust the date between 9 p.m and 3 a.m. Push the crown back to position 0 after
the adjustment.
ADJUSTING THE FUNCTIONS
1110P
0 - 1 - 2
28
DAT E
SELF-WINDING MECHANICAL MOVEMENT, DATE, SECONDS
B AC K WA R D
F O R WA R D
ENGLISH
