8
NOTE:
• Choose a different spot each time you test. Repeated punctures at the same spot may cause soreness and
calluses.
• Please consult your health care professional before you begin AST.
Getting a drop of blood (h)
1. Unscrew the cap of the device, insert the lancet in the appropriate support of the finger-pricking device and press firmly
downwards until it is fully engaged. Twist the lancet protective disk until it separates from the lancet.
D I G I T E S T
D I G I T E S T
2. Screw the device’s cap back on.
3. Adjust the pricking depth by rotating the selector. The selector includes positions from 1 to 6. The lowest depth is ideal for
delicate skin and paediatric use; the highest is ideal for thick and calloused skin.
D I G I T E S T
D I G I T E S T
4. After cocking the lancing device back, hold the lancing device firmly against the side of finger and then press the release
button.
D I G I T E S T
D I G I T E S T
5. In order to decrease the possibility of infection, dispose of the used lancets in accordance with local guidelines.
•
Each lancet must be used one time only. Do not share used lancets with another person.
•
Pay attention not to bring the lancet near the eyes, mouth, or an infected area.
•
Keep the lancet and finger-pricking device away from the reach of children.
Performing a Blood Glucose Test
To perform a blood glucose test, you will need:
(b), (c), (e)
and
(f).
WARNING:
The
GoGlic
blood glucose monitoring system shall only be used with
GlicTest
Test Strips. Using other test strips
with this meter can produce inaccurate results.
1.
Insert the test strip to turn on the meter
Wait for the meter to display “CHK” and a flashing “ ”.
2.
Select the appropriate measuring mode by pressing C.
Summary of Contents for GoClic
