6
The juicer is designed with a double safety system and can start working
only after all parts are installed correctly.
Please install and use the juicer as follows:
1. Turn the body's switch into position
“0” , put the pomace container in place and
install the middle ring into the body.
2. Put the juicing sieve into the middle ring
and ensure that the juicing sieve is
installed correctly on the motor wheel.
(Check the completeness of juicing sieve
before use; if damaged, do not use it)
.
3. Put the transparent cover into the body
from the right above and install it in the
direction indicated on the transparent
cover.
4. Put and press the handle to two lugs on
the transparent cover. It is correctly
installed with a cluttering sound, or the
juicer will not work.
Chapter IV. How to Assemble
