OPERATING AND INSTALLATION MANUAL SURFACE-MOUNTED UNIT LG 100 AP
PAGE 14
Changes reserved
1. Plus button
Increasing the ventilation level
2. Minus button
Reducing the ventilation level
3. Error LED
Indicates errors with different flashing patterns that light up
4. Filter LED
After the filter time has elapsed, the filter has to be checked.
For acknowledging the filter message, simultaneously press
the plus and minus buttons for 5 seconds.
5. WIFI button
- press once to activate the WIFI mode
- press for 2 seconds to deactivate the WIFI mode
- press for 5 seconds to call the Access Point mode
6. WIFI LED
- LED off = WIFI deactivated
- LED is lit = WIFI mode
- LED flashes = Access Point mode
7. Boost button
Activates ventilation level 3 (boost ventilation level) for a
defined period of time (standard: 60 minutes)
8. Boost LED
Is lit when the boost ventilation mode is active.
The LED of the current ventilation level is lit and the LED of
ventilation level 3 flashes.
9. Ventilation level LEDs
Indicate the current ventilation level
When all three LEDs are active, this corresponds to the auto-
matic mode. The ventilation unit follows a demand-controlled
air volume flow regulation via VOC.
When the defined time (configurable) has elapsed in the highest ventilation level, ventilation operation switches back automatically to
the ventilation level set last. Alternatively, you can end the boost ventilation mode manually before the time has passed. Simply press
the [-] button on your control unit.
Ventilation level 1
Boost ventilation mode
for a defined time
Ventilation level 2
Boost ventilation mode
for a defined time
Ventilation level 3
Boost ventilation mode
for a defined time
Pattern
Operation
Green LED level 1 is lit
Ventilation level 1
Green LED level 2 is lit
Ventilation level 2
Green LED level 3 is lit
Ventilation level 3
All three LEDs are lit green
“Automatic” ventilation level
USER
GENERAL
SPECIALIS
T PERSONNEL