background image

CEF/550

Descriptions

Single-Channel Elimination Filter

CEF/550

Single-Channel Elimination Filter

4

Rev. 06/03

Ph: 800-421-6511

www.picomacom.com

CEF550 89-Channel Passband 5-
550MHz (CATV T7-T13 2-78, 95-99)
eliminating any single channel
between 54-216MHz (CATV 2-13, 
95-99)

Deep -55dB typical cavity-tuned
notch filter for clean signal removal
of selected cable channels and 
subsequent insertion of locally 
originated signals 

High-Q helical resonators with
unique coupling circuitry provide
excellent long-term stability

Sharp filter cut-off edges allow 
adjacent channels to be processed
with negligible loss

Up to 4 units can be cascaded for
multiple channel elimination 
and reinsertion with negligible 
interaction

Compact and efficient design
enables single rack unit (1

3

/

4

˝) 

height installation saving valuable
rack space

Failsafe installation as input and
output may be reversed without
effect

The 

Pico Macom CEF550

is a professional grade single channel elimination 

filter designed to provide a 6MHz-wide carrier-free environment to insert locally

originated channels. When used in conjunction with 

Pico Macom’s

high quality

modulators, these units are the most cost-effective method to add locally origi-

nated programming to an MATV or CATV system while ensuring the highest

quality picture across the band. This unit employs multi-stage cavity bandpass

and notch filtering to provide single channel rejection depth typically greater

than -55dB, thereby eliminating disruptive carriers and greatly improving picture

quality. Also, the unique filter design and sharp frequency cut-off provide mini-

mum adjacent channel disruption and excellent passband frequency response

ensuring no degradation in system performance. In systems requiring more

than one inserted channel, up to 4 units can be cascaded for multiple channel

elimination and reinsertion with negligible interaction. The 

CEF550

is pre-tuned

to any channel in the notch range for easy drop-in installation.

Pico Macom

backs up this product with its industry leading 5-year limited warranty.

Summary of Contents for CEF/550









Reviews: